Dot XS-Autoclavable Version
| Description | |
|---|---|
| Dimensions/tolerance(in) | ø 0.24 x 0.1 (+/- 0.008) |
| Dimensions/tolerance (mm) | ø 6 x 2.5 (+/- 0.2) |
| IP rating | IP69K |
| Attachment | Tag carrier, welded, epoxy |
| Application temperature | -67°F to +302°F (-55°C to +150°C) |
| Operating temperature | -40°F to +185°F (-40°C to +85°C) |
| Read range on metal, 4W EIRP (2W ERP) | Up to 5 ft (1.5 m) |
| Weight | 0.012 oz (0.34 g) |
| Compliance | FDA Class I, RoHS, CE, ATEX |
Part Number
- Autoclavable Dot US: X4102-US040-H3
- Autoclavable Dot EU: X4102-EU040-H3
Xerafy’s Autoclavable XS tags are designed to comply with the most stringent FDA requirements for medical devices and the tags will withstand repeated autoclave sterilization cycles. The extremely low profile allows medical instruments to be RFID-enabled at the point of manufacture. The Autoclavable Dot XS is round and measures at 0.24 inches in diameter by 0.1 inches thick with a read distance of 5 feet (1.5 m).
| Functional Specifications | |
|---|---|
| RF air protocol | EPC Global Class1Gen 2; ISO18000-6C |
| Operating frequency | UHF 902-928 MHz (US); 866-868 MHz (EU) |
| IC type | Alien Higgs-3 |
| Memory configuration | 96-EPC bits; 512-bit user memory |
| Functionality | Read / write (user programmed) |
| Memory – expected read / write cycles | 100,000 cycles at 77°F (25°C) |
| Data retention | Up to 50 years |
| Read rate | 400 tags per second for 96-EPC bit number |
| Warrenty (limited) | 1 year |
| Material | Ceramic |
| Color | Black |
| Weight | 0.012 oz (0.34 g) |
| Performance Characteristics | |
|---|---|
| Read range on metal (2W ERP) | Up to 5 ft (1.5 m) |
| Polarization | Linear |
| Environmental and Industry Compliance | |
|---|---|
| FDA class | Class I |
| Compression strength | 181psi (1250kPa) |
| IP classification | IP69K 3 |
| Standard compliancy | RoHS (EU Directive 2002/95/EC) , CE (EU version) |
| Operational temperature (MIL STD 810-F) | -40°F to +185°F (-40°C to +85°C) |
| Application temperature (MIL STD 810-F) | -40°F to +302°F (-40°C to +150°C) |
| Humidity | |
| Operational humidity | 5%-95% non-condensing |
| Storage humidity | 5%-95% non-condensing |
| Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
|---|---|
| Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
| Thermal (hot water) disinfection• Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying.
• Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
| Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
| Ultrasonic cleaner 3KHz for 30 min | Pass |
| Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
| Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
| Detergent enzyme cleaner | Pass |
| Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
| Application and Installation | |
|---|---|
| Application | Medical devices |
| Applicable surface | Metal, plastic |
| Mounting methods | Epoxy, tag carrier, welded |
| Epoxy | FDA approved, autoclavable |
| Product Dimensions | |
|---|---|
| Dimensions (mm) | ø 6 x 2.5 |
| tolerance | +/- 0.2 |
| Dimensions (in) | ø 0.24 x 0.1 |
| tolerance | +/- 0.008 |
Specialities
- Withstands repeated sterilization cycles
- Designed to meet FDA requirements
- ATEX certified
Applications
- Surgical instrument management
- Medical device tracking
