Dot XXS – Autoclavable Version
| Description | |
|---|---|
| Dimensions/tolerance(in) | ø 0.16 x 0.10 (+/- 0.004) |
| Dimensions/tolerance (mm) | ø 4.08 x 2.58 (+/- 0.01) |
| IP rating | IP69K |
| Attachment | Glue, embedded |
| Application temperature | -67°F to +302°F (-55°C to +150°C) |
| Operating temperature | -40°F to +185°F (-40°C to +85°C) |
| Read range on metal, 4W EIRP (2W ERP) | Up to 1.6 ft (0.5 m) |
| Weight | 0.012 oz (0.34 g) |
Part Number
- Autoclavable Dot XXS US: X4302-US040-H3.
- Autoclavable Dot XXS EU: X4302-EU040-H3.
Xerafy’s XXS series metal tags are the world’s smallest passive UHF Class 1 Gen2 tags. The XXS tags complement the XS series to create more opportunities for even smaller assets to be RFID-enabled. These ultra-small tags simplify the embedding process and allow source tagging solutions to be explored. The XXS series also come in the autoclavable version, specially designed for the tagging of surgcal instruments in the healthcare market. The XXS tags are available in two form factors: the Dot XXS tag which is round and measures at Ø 0.16 x 0.10 inches thick, and the Dash XXS tag at 0.26 x 0.08 x 0.08 inches thick.
| Functional Specifications | |
|---|---|
| RF air protocol | EPC Global Class1Gen 2; ISO18000-6C |
| Operating frequency | UHF 902-928 MHz (US); 866-868 MHz (EU) |
| IC type | Alien Higgs-3 |
| Memory configuration | 96-EPC bits; 512-bit user memory |
| Functionality | Read / write (user programmed) |
| Memory – expected read / write cycles | 100,000 cycles at 77°F (25°C) |
| Data retention | Up to 50 years |
| Read rate | 400 tags per second for 96-EPC bit number |
| Warrenty (limited) | 1 year |
| Applicable surface | Metal surfaces |
| Material | Ceramic |
| Color | Black |
| Weight | 0.006 oz (0.16 g) |
| Performance Characteristics | |
|---|---|
| Read range on metal (2W ERP) | Up to 1.6 ft (0.5 m) |
| Polarization | Linear |
| Environmental and Industry Compliance | |
|---|---|
| FDA class | Class I |
| Compression strength | 568 psi (3922 kPa) |
| IP classification | IP69K |
| Standard compliancy | RoHS (EU Directive 2002/95/EC) , CE (EU version) |
| Operational temperature (MIL STD 810-F) | -40°F to +185°F (-40°C to
+85°C) |
| Application temperature (MIL STD 810-F) | -40°F to +302°F (-40°C to
+150°C) |
| Humidity | |
| Operational humidity | 5%-95% non-condensing |
| Storage humidity | 5%-95% non-condensing |
| Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
|---|---|
| Chemical sterilization for decontamination Liquid chemical sterilants
include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid |
Pass |
| Thermal (hot water) disinfection • Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers
reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying.• Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
| Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C
[250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). |
Pass |
| Ultrasonic cleaner 3KHz for 30 min | Pass |
| Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
| Disinfection by light C wave ultraviolet and wavelength range is from 200nrn
to 275nrn |
Pass |
| Detergent enzyme cleaner | Pass |
| Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
| Application and Installation | |
|---|---|
| Application | Medical devices |
| Applicable surface | Metal |
| Mounting methods | Epoxy, tag carrier, welded |
| Epoxy | FDA approved, autoclavable |
| Product Dimensions and Weight | |
|---|---|
| Dimensions (mm) | ø 4.08 x 2.58 |
| tolerance | +/- 0.01 |
| Dimensions (in) | ø 0.16 x 0.10 |
| tolerance | +/- 0.004 |
Specialities
- World’s smallest RFID metal tag
- Can be embedded in metal
- Withstands repeated autoclave and chemical washes
Applications
- Surgical instrument management
- Small asset tracking
- Source tagging
